3M Particulate Filter GP2, Organic Vapour Acid Gas Relief

Information

Common Applications/Hazards: For protection against welding fume, ozone, polishing and grinding particles. Also for spraying pesticides or herbicides with vapour pressure Protection FactorsNote that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels. This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels. With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) - With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES- Organic compounds with low vapour pressures (- Ozone up to 10 x WES - Offers relief from acid gases and organic vapours at levels below the WES.

*Nuisance Levels are those levels below the Workplace Exposure Standard (WES).

• 'Made from 3M high performance filter media for effective filtration efficiency
• Lightweight and provides low breathing resistance
• Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators

Cartridge type

• GP2

Filter Type

• Gas, Vapour & Particulate Filters

Gas and vapour protection type

• Relief from nuisance level acid gas.;Relief from organic vapours with vapour pressure < 1.3 Pa @ 25°C

Standards/ Approvals

• Complies with AS/NZS 1716:2012